[deutsch]
Photo diode amplifier & receiver
The following line of products is intended to be used in conjunction with pulsed (eg mode locked) lasers.
Don't hesitate to also ask for extended bandwidth up to 8GHz and/or higher gain, or different connectors
4GHz 32dB linear amplifier
includes 2.5GBit Photodiode InGaAs 1000 to 1700nm with FC mount
image currently missing
A bias voltage of 12V plus the amplifier power is applied through 3 pin connector.
Amplification of few MHz to 4GHz : 39dB (100MHz) .. 35dB (2GHz).. 32dB (4GHz) fixed.
Output connector : SMC
Required supply : GND, +5V, +5V, on 3pin connector
case : machined aluminum, size approx 52 x 39 x 15mm, plus perhaps a flange
its price is 250 CHFr @ 1
1.25GBit 35dB linear amplifier
includes 1.25GBit Photodiode InGaAs 1000 to 1700nm with FC mount
A bias voltage of 5V plus the amplifier power is applied through 3 pin connector.
Amplification of few MHz to 4GHz : 39dB (100MHz) .. 35dB (2GHz) fixed.
Output connector : SMC
Required supply : GND, +5V, on 3pin connector
case : machined aluminum, size approx 52 x 39 x 15mm, plus perhaps a flange
its price is 220 CHFr @ 1
1GHz 16dB linear amplifier
includes photodiode AEPX65, 500 to 1000nm
image currently missing
Bias voltage of your choice applied through 10 pin flat cable connector.
Amplification of few MHz to 1GHz : 20dB (100MHz) .. 16dB (1GHz) adjustable.
Extended bandwidth up to 8GHz and/or higher gain on request.
Output connector : SMC
Required supply : GND & +5V, on 10pin flat cable connector
case : machined aluminum, size approx 52 x 39 x 15mm, plus perhaps a flange
its price is 180 CHFr @ 1
Receiver with PECL output
includes photodiode AEPX65, 500 to 1000nm
image currently missing
Bias voltage of your choice applied through 10 pin flat cable connector.
Amplification of few MHz to > 100MHz adjustable. Min Light level 5mW *
Output is PECL.
Output connector : SMC
Required supply : GND & +5V, on 10pin flat cable connector
its price is 200 CHFr @ 1
Receiver with NIM output
includes photodiode AEPX65, 500 to 1000nm
image currently missing
Bias voltage of your choice applied through 10 pin flat cable connector.
Amplification of few MHz to > 100MHz adjustable. Min Light level 5mW *
Output is NIM : -18mA to GND, kind of negative Open collector
Output connector : SMC
Required supply : GND & -5V, on 10pin flat cable connector
its price is 200 CHFr @ 1
Receiver with LVDS output
includes Photodiode AEPX65, 500 to 1000nm
image currently missing
Bias voltage of your choice applied through 10 pin flat cable connector.
Amplification of few MHz to > 100MHz adjustable. Min Light level 5mW *
Output is LVDS.
Output connector : 3pin
Required supply : GND & +5V, on 10pin flat cable connector
its price is 200 CHFr @ 1
Receiver with TTL output
includes Photodiode AEPX65, 500 to 1000nm
image currently missing
Bias voltage of your choice applied through 10 pin flat cable connector.
Amplification of few MHz to 100MHz adjustable. Min Light level 5mW *
A lowpass filter is used to detect the ground harmonic, specify frequency.
Output is TTL 50 Ohm.
Output connector : SMC
Required supply : GND & +5V, on 10pin flat cable connector
its price is 200 CHFr @ 1
*) Min Light level 5mW means the photodiode output is in the range of
30mVp @ 50 Ohms
Approximate exchange rates (@ end of may 05)
100CHFr = 80 $US
100CHFr = 66 Euro
Questions or Request a quote
products
home
last update: 31.may.05 or perhaps later
Copyright (99,2005) Ing.Büro R.Tschaggelar